Investigation of Shear Capacities of Cold-Formed Steel Channel &SupaCee Sections

Authors

  • A.Medha Sri

DOI:

https://doi.org/10.46243/jstj.2018.v3.i1.179

Keywords:

Shear capacities, Cold-formed steel, Channel sections, SupaCee sections

Abstract

Cold-formed steel channel sections have been widely applied in structural buildings. This type of section is then added stiffeners in the web to form the new section called SupaCee. The capacities of these sections have been investigated due to shear actions paralleling their webs. Shear forces are assumed to be resisted by the web, but the presence of the flanges and lips also have specific impacts on the shear capacities of these sections. This paper, therefore, investigates the effects of the flange widths and lip lengths on the shear capacities of the channel and SupaCee sections. Also, the shear capacities of SupaCee sections are studied to illustrate their strength improvements compared to those of channel sections. Shear capacities of the investigated sections are determined according to AS/NZS 4600:2018. The study demonstrated the innovation of SupaCee sections in shear strength improvements in comparison with those of channel sections.

References

Yu WW, Laboube RA, Chen H (2019) Cold-formed Steel Design. John Wiley and Sons, 111 River Street, Hoboken, NJ 07030, USA

Pham NH, Vu QA (2021) Effects of stiffeners on the capacities of coldformed steel channel members. Steel Construction 14(4): 270-278

Pham CH, Hancock GJ (2010) Direct strength design of cold-formed C-sections in combined bending and shear. 20th International Specialty Conference on Cold-Formed Steel Structures-Recent Research and Developments in Cold-Formed Steel Design and Construction pp: 221- 236

Pham CH, Hancock GJ (2010) Finite element analyses of high strength Cold-Formed SupaCee® Sections in Shear, Proceedings of SDSS Rio. International Colloquium Stability and Ductility of Steel Structures Volume 2, 1025-1032

Pham CH, Hancock GJ (2013) Experimental Investigation and Direct Strength Design of High-Strength, Complex C-Sections in Pure Bending, Journal of Structural Engineering 139(11): 1842-1852

Pham CH and Hancock GJ (2012) Direct strength design of coldformed sections for shear and combined actions. Journal of Structural Engineering Volume 1, 759-768

Hancock GJ, Pham CH (2011) A signature curve for cold-formed channel sections in pure shear. Research Report R919

Hancock GJ, Pham CH (2012) Direct method of design for shear of cold-formed channel sections based on a shear signature curve. in 21st international specialty conference on cold-formed steel structures pp: 207-221. 9. Plank RJ, Wittrick WH (1974) Buckling under Combined Loading of Thin, Flat-Walled Structures by a Complex Finite Strip Method. International Journal for Numerical Methods in Engineering 8(2): 323- 339

Pham CH, Hancook GJ (2009) Shear buckling of thin-walled channel sections. Journal of Constructional Steel Research. 65(3): 578-585

Lau SCW, Hancock GJ (1986) Buckling of thin-flat-walled structures by a spline finite strip method. Thin-Walled Structures 4(4): 269-294

Hancock GJ, Pham CH (2013) Shear buckling of channel sections with simply supported ends using the Semi-Analytical Finite Strip Method. Thin-Walled Structures 71: 72-80. 13. Pham SH, Pham CH, Hancock GJ (2012) Shear buckling of thin-walled channel sections with complex stiffened webs. Research Report R924

Pham SH, Pham CH, Hancook GJ (2012) Shear buckling of thin-walled channel sections with complex stiffened webs. in 21st international specialty conference on cold-formed steel structures pp: 281-296

Nguyen VV, Hancock GJ, Pham CH (2015) Development of the Thin-Wall- 2 for Buckling Analysis of Thin-Walled Sections Under Generalized Loading. in Proceeding of 8th International Conference on Advances in Steel Structures

Hancock GJ, Pham CH (2022) Finite strip methods for stability analysis of thin- walled members with applications to the Direct Strength Method of design LTD

AS/NZS 4600-2018 (2018) Australian / New Zealand Standard TM Cold-formed steel structures. The Council of Standards Australia. 18. BlueScope Lysaght (2014) SupapurlinsSupazeds&Supacees. Blue Scope Lysaght

Published

2018-01-01

How to Cite

A.Medha Sri. (2018). Investigation of Shear Capacities of Cold-Formed Steel Channel &SupaCee Sections. Journal of Science & Technology , 3(1), 61–69. https://doi.org/10.46243/jstj.2018.v3.i1.179