IN HEAVY INDUSTRIES, A SAFETY SYSTEM FOR MINE WORKERS
DOI:
https://doi.org/10.46243/jst.2021.v6.i02.pp132-136Keywords:
Wireless Sensing Networks, WIFI Module, Arduino Mega, LCD Display, SensorsAbstract
This paper describes the work that was done to design and construct a prototype mine protection device using a wireless sensor network, with the aim of creating a safety system to monitor the environmental parameters of the mining region. A overview of the most recent studies on miner health and welfare, as well as mine safety initiatives, is included. Subsystems of the test system are then simulated. The hardware consisted of electrical circuits with a microcontroller as the primary processing unit. A graphical user interface is often used.
References
Occupational Health and Safety ISO 45001, Int. Org. Standardization, UK, 2016
X. Chen and P. Yu, ``Research on hierarchical mobile wireless sensor network architecture with mobile sensor nodes,'' in Proc. Int. Conf. Biomed. Eng. Informat. Oct. 2010, pp. 2863_2867
P. Deshpande and M. S. Madankar, ``Techniques improving throughput of wireless sensor network: A survey,'' in Proc. Int. Conf. Circuit, Power Compute. Technol., Mar. 2015, pp. 1_5
S. Kasera, N. Narang, and S. Narang, ``Network topology and extent in Communication Networks: Principles and Practice”. New York, NY, USA: McGrawHill, 2005
Y.-S. Choi, Y.-J. Jeon, and S.-H. Park, ``A study on sensor nodes attestation protocol in a wireless sensor network,'' in Proc. Int. Conf. Adv. Commun. Technol., Feb. 2010, pp. 574_579
W. Bing, X. Zhengdong, Z. Yao, and Y. Zhenjiang, ``Study on coal mine safety management system based on `hazard, latent danger and emergency responses,''' Procedia Eng., vol. 84, pp. 172_177, Nov. 2014
Y. K. Tan and K. Tseng, ``Low-voltage, DC grid-powered LED lighting system with smart ambient sensor control for energy conservation in green building,'' in Smart Grid Infrastructure & Networking. New York, NY, USA: McGraw-Hill, 2013
L. Yan-Fang et al., ``Fiber laser methane sensor and its application in coal safety,'' Procedia Eng., vol. 26, pp. 1200_1204, Sep. 2011
J. Dickens and R. Teleka, ``Mine safety sensors: Test results in a simulated test stope,'' in Proc. 6th Robot. Mechatronics Conf., Oct. 2013. pp. 105_110
Y. K. Tan Y.-and K. Tseng, ``Low-voltage, DC grid-powered LED lighting system with smart ambient sensor control for energy conservation in green building,'' in Smart Grid Infrastructure & Networking. New York, NY, USA: McGraw-Hill, 2013
