Application of Ground Granulated Blast Furnace Slag (GGBS) In High Performance Concrete

Authors

  • Vishakha N. Surati
  • Dr. Nisha P. Soni
  • Mr. Keyur P. Shah

DOI:

https://doi.org/10.46243/jst.2022.v7.i09.pp12-23

Abstract

Application of Ground Granulated Blast Furnace Slag (GGBS) for high-performance concrete is the demand of the decade as a supplementary cementitious material for making concrete more environmentally friendly and economical. In this research, the properties of High-performance concrete have been evaluated by incorporating (GGBS) as a replacement for cement, the production of which increases the amount of CO2 generated in the environment. This research focuses on making an M70 grade concrete mix with minimum use of cement and increasing the potential application of GGBS in various percentages. The properties evaluated during the experimental study were compressive strength, flexural strength, and split tensile strength of concrete. The result of the study concludes that the GGBS as a mineral admixture helps to control the quality of concrete and the workability of the mix is also increased. The result of the study also showed positive insights. The maximum compressive strength achieved with the use of mineral admixture is 77.4 Mpa and maximum tensile strength is 5.1 Mpa and flexural strength after 28 days of testing is 9.1 Mpa.

References

George, Reethu, Aneena Thomas, P. B. Amala Mary, and Niya Eldhose. 2016. “An

Experimental Study on Glass Fibre Reinforced Concrete.” International Research

Journal of Engineering and Technology 4(13):1–5

Journal, International, O. F. Engineering, Economical Analysis, O. F. Concrete, Steel

Fiber, Ggbs As, Partial Replacement, and O. F. Cement. 2018. “*1 1 , 2 & 3.”

Nagendra, V. 2018. “Ground Granulated Blast Furnace Slag (GGBS): Effect of

Particle Size and Dosage on Compressive Strength with Microstructural Analysis of

Concrete.” International Journal for Research in Applied Science and Engineering

Technology 6(5):2467–74. doi: 10.22214/ijraset.2018.5404

Prajapati, Anjali, Piyush Prajapati, and Mohammed Qureshi. 2017. “An Experimental

Study on High Performance Concrete Using Mineral Admixtures.” 5(2):2080–86

Prasanna, P. K., K. Srinivasu, and A. Ramachandra Murthy. 2021. “Strength and

Durability of Fiber Reinforced Concrete with Partial Replacement of Cement by

Ground Granulated Blast Furnace Slag.” Materials Today: Proceedings

(xxxx):5416–25. doi: 10.1016/j.matpr.2021.06.267

Prem, Prabhat Ranjan, Parukutty Sanker Ambily, Bhashya Vankudothu, and Bhajantri

H. Bharatkumar. 2020. “Sustainable Production of High Performance Concrete.”

Encyclopedia of Renewable and Sustainable Materials (January):527–36. doi:

Ramakrishnan, K., G. Pugazhmani, R. Sripragadeesh, D. Muthu, and C

Venkatasubramanian. 2017. “Experimental Study on the Mechanical and Durability

Properties of Concrete with Waste Glass Powder and Ground Granulated Blast

Furnace Slag as Supplementary Cementitious Materials.” Construction and Building

Materials 156:739–49. doi: 10.1016/j.conbuildmat.2017.08.183

Al Saffar, Doha M., Aymen J. K. Al Saad, and Bassam A. Tayeh. 2019. “Effect of

Internal Curing on Behavior of High Performance Concrete: An Overview.” Case

Studies in Construction Materials 10:e00229. doi: 10.1016/j.cscm.2019.e00229

Smarzewski, Piotr. 2019. “Influence of Silica Fume on Mechanical and Fracture

Properties of High Performance Concrete.” Procedia Structural Integrity 17:5–12

doi: 10.1016/j.prostr.2019.08.002

Published

2022-11-13

How to Cite

Vishakha N. Surati, Dr. Nisha P. Soni, & Mr. Keyur P. Shah. (2022). Application of Ground Granulated Blast Furnace Slag (GGBS) In High Performance Concrete. Journal of Science & Technology , 7(9), 12–23. https://doi.org/10.46243/jst.2022.v7.i09.pp12-23